how fish tail braid

http://www.michyshair.com/

The fishtail plait or braid is one of the most popular pages in the whole of the www.VirtualHairCare.com hairstyles information resource pages and with over 500 hair style pages and hair style galleries that is saying something about what we all want to know about our hair. If you are want to make a fishtail, french or simple plait we have the diagrams and how to tips that will help create the hairstyle braid you want right here.

The basic gist of this form of plaiting is that you don’t have to keep the sections separate for any longer than it takes to cross them over each other. The finished result should look like the herring bone pattern you see reproduced on fabric. Here are two variations.

Tools and other items you will need:

  • Covered elastic bands
  • Paddle or similar brush to remove tangles
  • A little hair spray
  • A clip to keep hair not being plaited out of the way
  • Possibly a few pins or grips or odd pin if you have layers to secure any stray bits!

Method 1: (for a single fish tail down the back of the head):

  1. Brush your hair through so that it is easily separated with your fingers.
  2. Take a section from either side of your face, about 3 cm (or 1″) deep, running from sideburns to temple.
  3. Draw the sections back towards the crown and cross the right section over the left.
  4. Using your right hand press the cross over point to the head to hold the hair in place.
  5. Use your left hand to pick up a new section from the left side. Take it from under the first section and make it about the same size.
  6. Take the new section of hair over the right-hand section and, as you do so, swap to hold the hair down with the left hand at the cross over point. The ends of the sections will naturally fall down the middle and merge with the rest of the hair.
  7. With the right hand now free, use it to pick up another new section from the right, cross it over the section from the left, held down in the middle. Again, as you cross over, change the hand that is holding the hair pressed to the head.
  8. Simply keep repeating this until you run out of hair. If you get lost, remember that the side from which you last took a section should correspond with the hand holding the hair in the middle. Therefore you are always about to take your new section from the side that the free hand is on.
  9. As you pass beyond the nape or can no longer take hair from the sides, continue by taking hair from the underneath of your “ponytail” and crossing this hair over at the centre front.
  10. Secure at the end with your covered band, it looks good if you use a fine section of hair to wrap over the band to cover it.

Method 2: (for a fish tail braid that starts from a ponytail in the nape of the neck or ‘bunches’ either side):

This is really simple, especially once you’re familiar with method 1 above.

  1. Gather your hair as if to place it in a ponytail or ‘bunches’.
  2. To start, take a section of hair from the left and right and then cross right over left, hold the cross over point in place with the right hand.
  3. With the left hand, take a section from underneath and bring it round to the front and cross it over the middle.
  4. Hold it pressed to the rest of the hair with the same hand, so freeing up the right hand.
  5. Using the right hand, take a section from underneath the ponytail and bring this round to the front from the right side, cross it over the middle and hold in place with the right hand freeing up the left.
  6. Keep repeating steps 3,4,5 until you run out of hair and then secure with a covered band.

The Fishtail braid, also known as the Herringbone or Fishbone, looks elaborate and time-consuming. But it’s actually really fun and easy to do!!

  1. Divide your hair into three sections.
  2. Pull a thick strand of hair from the outside of the first section, and add it to the third section.
  3. Do the same for the right side. Pull a skinny strand of hair out from the outside of the third section, and add it to the second section. Make it loose.
  4. You just keep repeating the steps until you want to stop.
  5. When you’re done just tie it with an elastic band. Add a cute ribbon or charm to give it some personality if you’d like!

The source:

how to do fishtail plait

http://frenchbraids.org

The fishtail plait or braid is one of the most popular pages in the whole of the www.VirtualHairCare.com hairstyles information resource pages and with over 500 hair style pages and hair style galleries that is saying something about what we all want to know about our hair. If you are want to make a fishtail, french or simple plait we have the diagrams and how to tips that will help create the hairstyle braid you want right here.

The French braid is a sophisticated and classic hairstyle, but can be a little bit intimidating for first-timers to do because of how intricate it looks. If you love the look of a French braid, but is not quite ready to practice the technique, opt for its easier variation called the fishtail braid. Also known as the Fishbone or Herringbone braid, this type of French braid involves less twisting even if it looks more elaborate than the traditional braid. Since you don’t have to keep so much hair under control when creating this look, it can be a fun hairstyle to do.

A fishtail French braid can be created on a ponytail or as a full braid, starting from the front of the hairline. If you haven’t mastered the French braid yet, it is best to practice learning the Fishbone braid on ponytails before tying full-blown braids from the hairline. To get this look, your hair should be medium length or long. You’ll need a rat tail comb, elastic band or bow, bobby pins and mirrors (if you’ll be working on your own hair).

  1. Choose a section of hair where you want the braid to start. Most fishtail braids begin at the hairline, so choose a central point and divide it into two even sections. Make sure to remove tangles from both sections by combing thoroughly.
  2. Cross the right section over the left one. Pull the sections away from each other when tightening the braid. Lift a small section of hair from the right section hairline to the middle of the braid by using the end of a rat-tail comb. If you want a more intricate look, pull thinner strands. If you want a more woven appearance, add more strands. Add the new section of hair to the existing right section and cross it over the left section, tightening the braid as you go.
  3. Use the end of the rat-tail comb again when lifting some strands of hair on the left section and drawing a line from the hairline to the middle section. Even it out with the section you’ve lifted from step 2. Add the lifted hair to the existing left section and cross it over to the right section.
  4. Repeat steps 2 and 3, continuing to alternate right and left sections. Make sure to tighten each plait as you progress until you reach the hairline at the back of your neck (the nape).
  5. Secure the remaining hair with a hair elastic or keep the remaining hair hanging free. You can also weave a basic braid to the ends to hold the fishtail braid together. Avoid using office rubber bands when holding the braid as this could damage your hair. You can use bobby pins in securing loose or fly-away hairs.

When you weave a fishtail braid, make sure to decide on the thickness of strands to use. Pulling in different thickness of strands could make the braid look uneven when done. Once you’ve mastered the Fishbone braid, you can experiment on creating a different look by crossing the sections of hair “under” each other, instead of over each strand. To create a loose fishtail braid, hold your hands away from the head. Regardless of which style you want to go, the fishtail braid can be a stunning two-strand braid to do for a casual day and even red carpet events.

The source: